Product Description

PRODUCT DESCRIPTION of Hammer Injection Packer

Hammer Injection Packer made by PA66 material, drill holes by 10mm driller, fix the packer into the holes by #5 electric hammers. And working pressure not exceeds 200bar.

The use of Hammer Injection Packer

The Hammer-In port (Bang in Packer) is 3/8” (10mm) or 1/2” (13mm). The ports are inserted into the drill hole with the tap of a hammer. These packers do away with the sleeve and compression sleeve mechanism as the plastic body of the packer itself creates a compression seal. The packers are set very quickly increasing productivity on the job site. Due to the lower friction fit, injection pressures are limited with this packer type.