Product Description

PRODUCT DESCRIPTION of Hammer-in Button head Packer

Hammer Injection Packer made by Nylon Material, drill holes by 16mm driller, fix the packer into the holes by #5 electric hammers. And working pressure not exceeds 250bar.

The use of Hammer-in Button head Packer

The Hammer-In port (Bang in Packer) is 5/8” (16mm) .The ports are inserted into the drill hole with the tap of a hammer. These packers do away with the sleeve and compression sleeve mechanism as the plastic body of the packer itself creates a compression seal. The packers are set very quickly increasing productivity on the job site. Due to the lower friction fit, injection pressures are limited with this packer type.