Product Description

The design of the grease nipple type brass packer incorporates a non-return valve in the lower portion of the packer. When the resin has set, the top of the packer simply unscrews. This enables the base to be left in place leaving a small recess which can easily be filled using epoxy paste. The hook on type has the non-return ball valve located in the head and this can simply be removed enabling the operative to relieve the water pressure within the structure prior to injection.

• Brass Injection Packers, also known as mechanical packers, are suitable for repairing cracked foundations using high pressure injection, typically at 1,000 to 10,000 PSI.
• Are placed in holes drilled at 45 degrees to intersect the interior of the crack.
• Each Injection Packer locks into the drilled concrete hole by compressing the rubber sleeves surrounding the threaded brass or steel body, ensuring that it seals quickly and tightly at pressures of several thousand PSI.
• Injection Packer size depends on a crack’s depth and the volume of material needed.

Available Injection Packer Sizes:

• 3/8″ x 2.75″
• 1/2″ x 2.75″
• 1/2″ x 4″
• 5/8″ x 2.75″